News
Contact Us
Guangdong Granville Laser Technology Co. Ltd.
Contact:Mr.Zhou
Phone:+86 137 1240 0052
Tel:0769-28826357
Fax:0769-28826357
HOtline:4000-829-388
Website:www.weifalaser.com
E_mail:2418746001@qq.com
Address:Guangdong province Dongguan City Wanjiang liuyongwei Industrial Park Changmao Ming community
The use and maintenance of fiber laser cutting machine
Fiber laser cutting machine in the type of machinery which belongs to the high-tech large machinery, this machine at the time of purchase price is very high, and in the course of the use of the technical requirements of the technical staff is also very high, so we use the machine Of the process which must always be on the mechanical processing and maintenance.
First, let the strip always keep tight state
The steel belt in the operation of the laser cutting machine played a very important role in the transmission, and this material is its steel steel, the steel in the course of the use of if there is no tension, it is easy to lead to be cut items were thrown Out of the track, and even the strip may also have the phenomenon of slippage, so that the safety of the staff had a great threat, so no matter when and where, we must keep the strip in a state of tension, so as to the construction The safety of personnel play a protective role.
Second, often check the angle of the tool
Because the most important part of the fiber laser cutting machine is the cutting machine, if the cutting machine angle of a certain deviation, then the process of cutting will easily lead to cutting the final accuracy of the object is not so accurate The
Third, often inside the mechanical cleaning dust
As the laser cutting machine in the cutting time will be directly on the surface of the metal vaporization, so the cutting machine in the surface and the internal will often produce a lot of dust, we should often these dust with a vacuum cleaner sucked out, so as to ensure that the internal zero Parts between the spotless, so that the parts can be guaranteed between the normal operation.
Fourth, the parts should be regularly treated with lubricating oil
We need from time to time on the rack, rail and a lot of parts of the cutting machine lubricating oil, so that they can ensure that the gear in the operation of the bite of the very precise. In this way, the mechanical operation will be in the normal running track, cut out the product accuracy is also higher.